Pinball Backglass Polished Stainless Steel Lift Channel 5/32″ – CPR

Description

Pinball Backglass Polished Stainless Steel Lift Channel 5/32″ – CPR

CPR backglass reproductions are predominantly made with 4.00 mm tempered glass, which this lift channel is designed to accommodate. These are custom trim kits specifically designed for CPR backglasses that you order from us.

Please check description on the individual backglass listing. There are SOME CPR backglasses that require the larger 3/16″ Lift Channel.

1/8″ = 3.175 mm – Not this lift channel. Not suited to ANY CPR Backglasses.

5/32″ = 4.0 mm – This lift Channel. Custom designed for MOST CPR Backglasses listed on the site.

3/16″ = 4.7625 mm – Not this lift channel. SOME CPR backglasses listed on this site.

The lift trim is secured with either the “Friction Tape” on our website, or low tack tape. It is not recommended to slide the lift channel on without a protective layer between the backglass and the metal lift trim.

Made from pre-polished stainless steel to exact tolerances Fits most Bally, Williams and Stern machines from the 1970’s.

Reference – ChromeLift-CPR