Cabinet Protectors – Pincabs

Description

Set of 4 Original PinCab Protectors™

If you have a pin that you want to preserve the beauty and value of, you need these PinCab Protectors.

PinCab Protectors work great on late model Bally/Williams pins (Cactus Canyon, Monster Bash, Medieval Madness, Revenge from Mars, Star Wars Episode 1) that have the decals that lift and peel away from the legs. They also work great on any machine that has been damaged from the legs digging into the cabinet, and that’s just about every machine in existence! These PinCab Protectors are about 1/4” bigger than the legs, so they cover up the existing damage while protecting against further damage. PinCabs go on the cabinet under the legs. They are very easy to install, just place them between the cabinet and the legs and then bolt on the legs as normal.

If you think your pinball machine is “safe” because it is already in your game room and you don’t intend to move it, think again. Every time a player “nudges” the pin to try to save a ball they are putting pressure where the legs meet the cabinet causing the legs to dig into the cabinet. When you hear the “tilt” warning, or someone slides your machine over to get something that fell under the pin the potential for damage is very high.

Advantages of Polypropylene.

PinCab Protectors are made out of Polypropylene plastic. The advantages of Polypropylene are:

• Polypropylene has a somewhat slippery surface texture, so they tend to slide instead of dig in.

• Polypropylene is a softer plastic. This prevents the PinCabs from digging into the pinball cabinet.

• PinCab Protectors are molded with a slight radius edge, further preventing any digging into the pinball cabinet.

Sold in sets of 4 only.

These are Genuine Pincab Protectors. If the “Pincab Protector” logo is not stamped onto the protectors, then they are cheap copies that can damage your cabinet artwork !